EDR PERFORMANCE RACING SMOG PAIR BLOCK OFF PLATES FOR BMW S1000RR

$ 19.95
MODEL YEAR
ADD VALVE DELETE PLATE (REQUIRES REFLASH)

Better performance and tuning ability for your BMW S1000RR/S1000R by EDR PERFORMANCE.

We designed these to block off the ports on the valve cover used by the pair system (often referred to as SAS - Secondary Air System).

The air injection system cycles new air into the exhaust port to burn any non-combusted fuel particulates; this caused backfires and makes the bike harder to start/run.  These plates will stop this action so the bike will run smoother, and it makes the bike easier to tune. Using the standard pair system can result in incorrect air-fuel readings once you've installed an exhaust system.

A very simple necessity for tuning your S1000RR. Kits include cap for airbox if the valve is being left on the air box

 

Add on our Valve Delete plate to remove the valve from your bike's airbox - REQUIRES ECU REFLASH TO DISABLE

 

Limited stock, please allow lead time for printing.

 

 

EDR PERFORMANCE 3D PRINTED Smog Block Off Plates seal off the ports on the valve cover used by the air injection system (AKA smog pumps, PAIR, or AIS). Once these are capped off, the air injection system can be safely removed.  Installation helps with tuning the bike by avoiding excess air in exhaust where air/fuel ratio is measured. NECESSARY for all O2 sensor based tuning 

Intended for Closed Course use ONLY

 

Related Products

Scroll To Top