Graves Yamaha R1 Cat Eliminator Exhaust System
Graves Motorsports Yamaha R1 Cat Eliminator Titanium Exhaust System with carbon fiber 265mm silencer. Graves' precise engineering develops precision products that are designed to outlook, outperform and outlast the competition. Graves Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This exhaust system was developed using the same technology that has powered the Graves Racing Team to 31 Professional AMA National Championships including 9 Superbike Championship titles and 3 Side x Side Pro Titles (Pro Stock and Pro Mod UTV).
This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited. 1. “NOT LEGAL FOR SALE OR USE IN CALIFORNIA” / 2. “NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES” / 3. “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY”
This Graves Motorsports Cat Eliminator exhaust is designed for the racer on a budget seeking the closest performance exhaust to our full race system. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 11+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
We use the same 1.00 MM thick wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer is hung with a strapless an Aluminum bracket / anodized black and built into the silencer. The silencer sleeve is made of Carbon fiber that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry.
- Chuck Graves
Features:
Stock Can + Cat System Weight = 18.8lbs. : Cat Eliminator System Weight = 4.4lbs. (14.4lb. savings)
DB at Idle 90 / DB at 5000rpm 106.5
Fitment: Yamaha R1 R1M R1S 2015-2022 (Note 2020 + R1 riders can call in the orders to have front 02 sensors added for an extra charge).
This Graves Motorsports Cat Eliminator exhaust is designed for the racer on a budget seeking the closest performance exhaust to our full race system. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 11+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
We use the same 1.00 MM thick wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer is hung with a strapless an Aluminum bracket / anodized black and built into the silencer. The silencer sleeve is made of Carbon fiber that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry.
- Chuck Graves
Features:
- New Diamond Shaped Silencer Design (Carbon Fiber Cans with Carbon End Cap) designed to match the R1's body line.
- Silencer mounts directly to OEM rearset bracket using a stealth strapless mount built into the setup.
- Constructed from Aerospace grade hi heat Titanium alloys
- 1 Auto Tuner Style Lambda sensors comes standard (OEM dual sensor mounts up front are eliminated for a smoother flowing exhaust. When using any Graves performance system on the 15-19 R1 Flash Tune products are recommended to enhance the bikes performance everywhere. The most effective tune on this setup does not utilize the stock lambdas at all. 2020 + owners will need to custom order by call in to have the front 02 sensors added to this model
- Advanced welding process showcases laser perfection welds
- 14.4lbs lighter than stock
- Performs like a full system, looks like a full system at 50% the cost.
Stock Can + Cat System Weight = 18.8lbs. : Cat Eliminator System Weight = 4.4lbs. (14.4lb. savings)
DB at Idle 90 / DB at 5000rpm 106.5
Fitment: Yamaha R1 R1M R1S 2015-2022 (Note 2020 + R1 riders can call in the orders to have front 02 sensors added for an extra charge).
Related Products
EDR Performance Fork Travel Indicators 41 - 44 mm Red Blue Green Black
$ 12.00
EDR Performance fork travel indicators are here! -No more ugly zip ties -No more rubber bands that dry rot and...
Galespeed Fluid Reservoir tank .32ml
$ 35.99
.32ml brake fluid tank with mounting bracket that rotates 360 degrees around the tank. Since it can be moved to any position, it...
Vesrah VD-9031RJL Motorcycle Race Brake Pad
$ 79.00
$ 94.00
The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers. ...
Works Bar Radiator Cap
$ 29.95
Works 2.0 Bar Radiator Cap. This radiator cap is designed to keep your engine from overheating by maintaining a...
DNA, Aprilia, RSV4, Air, Filter, (2015+)
$ 84.99
DNA Aprilia RSV4 (2016+) Air Filters add horsepower while letting your sportbike breath better. The efficiency of DNA Filters maximizes breathable...
Rapidbike Fuel Tuning Module for Aprilia Racing
$ 695.00
All Rapid Bike products are for closed-course competition use only. This kit includes the Rapid Bike Racing module, a USB cable,...
Galespeed Master Brake Switch Kit
$ 25.00
Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the...
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount
$ 45.95
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount Bracket is used to position the AIM Solo2 l(sold separately)...
Graves Exhaust Logo - Black and White
$ 6.50
Exhaust logo replacement badge. Foil based Graves "G" exhaust logo in Black and White. = 3.734 x 4.921 inches. Unless ordered with...
Graves Motorsports Bar End Mirror Adapter - Black
$ 24.95
Graves Motorsports Yamaha R1 + R6 Billet Aluminum Barend Mirror Adapter. Sold each (1) these motorcycle bar end mirror...
Galespeed Elaborate Brake Master Cylinder 19mm
$ 546.00
Galespeed VRE Elaborate 19mm (Variable Ratio Elaborate) mastercylinder /. Galespeed designed & developed "Variable lever Ratio Control" gives you...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Black
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized BLACK. Replace your plastic OEM fuel cap...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Green
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized GREEN finish. Replace your plastic OEM fuel...
FTEcu Ninja 400 / Z400 / Ninja 650 KDS to OBDII Diagnotic Harness Adapter
$ 39.95
This harness allows you to use a standard OBD-II automotive scanner with your bike. Many later model bikes can...
FTEcu Kawasaki ZX-10R ABS Delete Plug
$ 349.00
FTECU’s Kawasaki ZX-10R ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your...
Graves Motorsports Replacement Frame Slider Puck - Long
$ 21.99
Graves Motorsports Replacement Frame Slider Puck "LONG." All Graves frame saver replacement pucks are available in Black or White. This listing...
Graves Motorsports Motorcycle Footpegs
$ 38.50
Graves Motorsports Replacement Footpeg. This is a direct replacement pegs for the Graves Motorsports rearsets. The bike pegs are...
Universal License Plate Light Kit
$ 29.95
License Plate Light Universal Kit. This universal LED kit comes with 1 high intensity LED light cluster, a plate mounting...
Yamaha WR250R + WR250X WORKS Exhaust System
$ 1,149.49
Graves Motorsports Yamaha WR250R + WR250X WORKS Exhaust System. This exhaust features Graves Motorsports proprietary ADSD exhaust technology. Constructed...
DNA KTM 690 / Husqvarna 701 Air Filter
$ 85.00
DNA Air filter for the KTM 690 Enduro / Husqvarna 701 lines. FITMENT: Husqvarna Enduro 701 (16-22) / KTM 690 SMC...
Yamaha R6 YXZ1000r High Precision Self-Oiling Cam Chain Tensioner
$ 196.95
Graves Motorsports Yamaha R6 / YXZ1000r High Precision Self Oiling Cam Chain Tensioner for 2006-2023 + R6 and 2016-2023 YXZ1000r...
Aprilia ECU Re-Flash by EDR Performance
$ 495.00
The world famous ECU tuning by EDR PERFORMANCE. APRILIA models *PLEASE NOTE SOME OF THE THE APRILIA ECU CANNOT BE...
EDR Performance Aprilia RS660 Velocity Stacks
$ 250.00
EDR Performance RS660 Velocity Stack kit The EDR Performance RS660/Tuono 660 2021+ Velocity stacks are the PROVEN best for your Aprilia,...
EBC FA266HH, Aprilia, Ducati, Honda, KTM, Kawasaki
$ 45.00
Features The worlds #1 selling organic disc brake pads EBC brake pads contain Aramid fibers, these are man-made high performance...
BONAMICI APRILIA RSV4 CLIP-ONS (UNLIFTED - ZERO OFFSET) (51MM)
$ 269.99
ITEM DETAILS Bonamici Clip-Ons are machined from 6061-T6 billet aluminum. Tangent tube design with a 0' degree rake for a...
Bonamici, Aprilia, RSV4, Folding, Levers, (2009+), (Black/Red)
$ 249.99
Bonamici Folding Brake & Clutch Levers for Aprilia RSV4 / Factory APRC (2009-2017) motorcycles. Produced in Italy from aerospace grade...
Vesrah VD-9031XX Motorcycle Race Brake Pad
$ 119.00
$ 139.00
The SRJL-XX Brake Pad compound is an excellent track offering by Vesrah. These brake pads have similar initial "BITE" as...
EDR Performance Block Off Plates S M O G Honda Ducati Kawasaki Suzuki BMW Aprilia Yamaha
$ 0.00
The new EDR Performance engine smog block off plates are now available! 100% Made in USA *Most models are...
EDR Indoor Motorcycle Storage
$ 125.00
EDR INDOOR MOTORCYCLE STORAGE EDR Performance is now offering monthly Indoor Secure heated Storage for your motorcycle. We solved the...
Graves Motorsports 2 in 1 Socket ZX-6R
$ 64.99
Graves Motorsports 2 in 1 Socket is a direct fitment for the steering castle nut and front axle nut...
Graves Motorsports Rear Axle Alignment Tool Kawasaki ZX6R ZX10R
$ 45.00
Graves Motorsports Rear Axle Alignment Tool for the ZX-6R and ZX-10R (years listed below). The Rear Axle Alignment Tool...
Graves WORKS R7 Rear Wheel Captive Spacers Kit
$ 61.02
Graves Motorsports R7 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves WORKS R7 Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports R7 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves WORKS R6 Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha team bikes. These...
Yamaha R7 / R6 / R1 / FZ10 / MT10 - Rear Stand Hook Kit
$ 109.95
Yamaha R7 -R6 - R1 - FZ10 - MT10 Rear Bike Stand "HOOK" kit. Graves Motorsports Stand Hook Kit is designed to...
Graves Motorsports R3 WORKS Captive Rear Wheel Spacer Kit
$ 61.00
Graves Motorsports R3 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R3 WORKS Captive Front Wheel Spacer Kit
$ 59.00
Graves Motorsports R3 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R1 WORKS Captive Rear Wheel Spacer Kit
$ 63.00
Graves Motorsports R1 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha team bikes....
Graves Motorsports R1 R6 WORKS Captive Front Wheel Spacer Kit
$ 60.00
Graves Motorsports R1 R6 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory...
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit
$ 68.00
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R6 WORKS Captive Front Wheel Spacer Kit
$ 60.00
Graves Motorsports R6 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves WORKS Kawasaki ZX-4RR Rear Wheel Captive Spacers Kit
$ 69.00
Graves Motorsports ZX-4RR WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves Motorsports WORKS Kawasaki ZX-6R Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports Kawasaki ZX-6R (2019-2024) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-6R Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports Kawasaki ZX-6R (2019-2024) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-10R Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports Kawasaki ZX-10R (2016-2023) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-10R Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports Kawasaki ZX-10R (2016-2023) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki Ninja 400 Rear Wheel Captive Spacers Kit
$ 63.00
Graves Motorsports Kawasaki Ninja 400 (2018-2023) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race...
Graves Motorsports WORKS Kawasaki Ninja 400 Front Wheel Captive Spacers Kit
$ 55.00
Graves Motorsports Kawasaki Ninja 400 (2018-2023) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race...
Graves Motorsports Yamaha R1 Suspension Link 09-14
$ 500.00
Graves Motorsports R1 suspension linkages are the result of continued testing and race experience on the Yamaha R1. These...
Graves Motorsports Yamaha R1 Upper Shock Mount 09-14
$ 69.95
Graves Motorsports Yamaha R1 Upper Shock Mount 09-14. Use the Graves Motorsports clevis on your 2009-2013 Yamaha R1, when...