Graves Yamaha R1 Cat Eliminator Exhaust System
Graves Motorsports Yamaha R1 Cat Eliminator Titanium Exhaust System with carbon fiber 265mm silencer. Graves' precise engineering develops precision products that are designed to outlook, outperform and outlast the competition. Graves Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This exhaust system was developed using the same technology that has powered the Graves Racing Team to 31 Professional AMA National Championships including 9 Superbike Championship titles and 3 Side x Side Pro Titles (Pro Stock and Pro Mod UTV).
This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited. 1. “NOT LEGAL FOR SALE OR USE IN CALIFORNIA” / 2. “NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES” / 3. “LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY”
This Graves Motorsports Cat Eliminator exhaust is designed for the racer on a budget seeking the closest performance exhaust to our full race system. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 11+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
We use the same 1.00 MM thick wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer is hung with a strapless an Aluminum bracket / anodized black and built into the silencer. The silencer sleeve is made of Carbon fiber that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry.
- Chuck Graves
Features:
Stock Can + Cat System Weight = 18.8lbs. : Cat Eliminator System Weight = 4.4lbs. (14.4lb. savings)
DB at Idle 90 / DB at 5000rpm 106.5
Fitment: Yamaha R1 R1M R1S 2015-2022 (Note 2020 + R1 riders can call in the orders to have front 02 sensors added for an extra charge).
This Graves Motorsports Cat Eliminator exhaust is designed for the racer on a budget seeking the closest performance exhaust to our full race system. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range. Combined with Graves’ exclusive flash tune map this system produces a solid 15+ HP in the midrange and 11+ on the top of the horsepower charts. This tune also removes any computer error codes the bike will have when installing performance exhausts.
We use the same 1.00 MM thick wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to the deep draw tapered Titanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The Collector attaches to the stock mount under the frame with a Titanium tab that has an 8MM machine Titanium nut welded to the tab. The silencer is hung with a strapless an Aluminum bracket / anodized black and built into the silencer. The silencer sleeve is made of Carbon fiber that attaches to the titanium end caps with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry.
- Chuck Graves
Features:
- New Diamond Shaped Silencer Design (Carbon Fiber Cans with Carbon End Cap) designed to match the R1's body line.
- Silencer mounts directly to OEM rearset bracket using a stealth strapless mount built into the setup.
- Constructed from Aerospace grade hi heat Titanium alloys
- 1 Auto Tuner Style Lambda sensors comes standard (OEM dual sensor mounts up front are eliminated for a smoother flowing exhaust. When using any Graves performance system on the 15-19 R1 Flash Tune products are recommended to enhance the bikes performance everywhere. The most effective tune on this setup does not utilize the stock lambdas at all. 2020 + owners will need to custom order by call in to have the front 02 sensors added to this model
- Advanced welding process showcases laser perfection welds
- 14.4lbs lighter than stock
- Performs like a full system, looks like a full system at 50% the cost.
Stock Can + Cat System Weight = 18.8lbs. : Cat Eliminator System Weight = 4.4lbs. (14.4lb. savings)
DB at Idle 90 / DB at 5000rpm 106.5
Fitment: Yamaha R1 R1M R1S 2015-2022 (Note 2020 + R1 riders can call in the orders to have front 02 sensors added for an extra charge).
Related Products
EDR Performance Fork Travel Indicators 41 - 44 mm Red Blue Green Black
$ 12.00
EDR Performance fork travel indicators are here! -No more ugly zip ties -No more rubber bands that dry rot and...
Galespeed Fluid Reservoir tank .32ml
$ 39.59
.32ml brake fluid tank with mounting bracket that rotates 360 degrees around the tank. Since it can be moved to any position, it...
DNA Suzuki GSXR 1000 / GSXR1000R / GSXR 1000R Air Filter 2017 /2025 DNA-P-S10S17-01
$ 114.00
$ 127.00
DNA Suzuki GSX-R 1000 Air Filter for the 2017-2022 Models. DNA-P-S10S17-01 FITMENT: GSX-R 1000R 2017-2025 GSX-R 1000 2017-2025 GSX-R 1000...
Vesrah VD-9031RJL Motorcycle Race Brake Pad
$ 79.00
$ 94.00
The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers. ...
Graves Motorsports Sport Bike Rear Brake Return Spring
$ 24.95
Graves Motorsports Sport Bike Rear Brake Return Spring Simple solution to the problem of the rear brake dragging. This...
EDR Performance Aprilia RS660 Velocity Stacks RS Tuono
$ 280.00
EDR Performance RS660 Velocity Stack kit The EDR Performance RS660/Tuono 660 2021+ Velocity stacks are the PROVEN best for your Aprilia,...
Galespeed Master Brake Switch Kit
$ 27.50
Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the...
EDR Ninja 400 500 WORKS Clutch Spring Kit
$ 33.00
Kawasaki Ninja 400 and Ninja 500 WORKS Kit Clutch Springs for the 2018-2023 models. Kit Springs provide improved feel...
Galespeed Elaborate Brake Master Cylinder 19mm
$ 600.60
G Galespeed VRE Elaborate 19mm (Variable Ratio Elaborate) Brake master cylinder. Galespeed designed & developed "Variable lever...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Green
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized GREEN finish. Replace your plastic OEM fuel...
DNA Yamaha R6 Air Filter 2008-2024 DNA-P-Y6S08-0R
$ 104.00
DNA Yamaha R6 Air Filter for the 2008 and up Models. FITMENT: Yamaha R6 2008 + FEATURES: DNA Filtering Efficiency:...
DNA Yamaha R1 - R1M - R1S - MT10 - FZ10 Air Filter 2015+ DNA-P-Y10S15-0R
$ 139.00
DNA Yamaha R1 - R1M - R1S - MT10 - FZ10 Air Filter. FITMENT: FZ10 2016-2017 MT10 2016-2020 MT10SP 2017-2020...
Aprilia RS660 Steering Stop Kit
$ 36.00
Aprilia RS660 steering stop kit. 100% BOLT ON! no drilling or modifications The EDR Performance designed and produced steering...
DNA Aprilia RSV4 / RSV4-1100 RSV-4 1100 Air Filter, 2015 +
$ 84.00
DNA Aprilia RSV4 (2016+) Air Filters add horsepower while letting your sportbike breath better. The efficiency of DNA Filters maximizes breathable...
Rapidbike Fuel Tuning Module for Aprilia Racing
$ 695.00
All Rapid Bike products are for closed-course competition use only. This kit includes the Rapid Bike Racing module, a USB cable,...
EDR Performance Block Off Plates S M O G Honda Ducati Kawasaki Suzuki BMW Aprilia Yamaha
$ 0.00
The new EDR Performance engine smog block off plates are now available! 100% Made in USA *Most models are...
Graves Motorsports 2 in 1 Socket ZX-6R
$ 69.95
Graves Motorsports 2 in 1 Socket is a direct fitment for the steering castle nut and front axle nut...
Graves Motorsports Rear Axle Alignment Tool Kawasaki ZX6R ZX10R
$ 45.00
Graves Motorsports Rear Axle Alignment Tool for the ZX-6R and ZX-10R (years listed below). The Rear Axle Alignment Tool...
Graves Pneumatic Preload Adjuster for Ohlins TTX Shocks
$ 395.00
Graves Pneumatic Preload Adjuster for Ohlins TTX shocks: ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an...
Graves Motorsports Yamaha R1 Sprocket Cover 09-14
$ 89.95
Graves Motorsports Yamaha R1 Sprocket Cover for the 09-14 model R1. Machined from billet aluminum this Yamaha R1 sprocket...
Graves Motorsports R1 Clutch Kit
$ 83.95
Graves Motorsports WORKS R1 Clutch Kit is designed to get rid of the clutches grabbing or "lurching" tendencies on...
Galespeed Master Brake Switch Kit Multi
$ 27.50
Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the...
ZX-10 + ZX-4RR Throttle Tube
$ 129.99
Graves Motorsports Kawasaki ZX-10R (2021 + only) / Kawasaki ZX-4RR (2023) Removes the negative travel dead zone resulting in smoother and...
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount
$ 45.95
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount Bracket is used to position the AIM Solo2 l(sold separately)...
Graves Motorsports Exhaust Replacement Spring
$ 4.35
Graves Motorsports Exhaust Replacement Spring. Sold as single (1) units each. These springs are rubber coated to reduce vibration...
Graves Motorsports 45mm Riser Clip-on Motorcycle Handlebars
$ 250.95
Graves Motorsports 45mm Mid Mount Riser Clip-on Motorcycle Handlebars. These Clip-ons feature CNC machined 7075-T6 billet aluminum clamps for...
Graves Motorsports Bar End Mirror Adapter - Black
$ 32.95
Graves Motorsports Yamaha R1 + R6 Billet Aluminum Barend Mirror Adapter. Sold each (1) these motorcycle bar end mirror...
Graves Motorsports Clip-on Replacement Bar
$ 32.95
Graves Motorsports Clip-on Replacement Bar Graves Motorsports Replacement Clip-On Handlebar. Replace your handle bar tube in your Graves Motorsports clip-on...
Galespeed VRD Master Cylinder 19mm
$ 412.50
Galespeed VRD 19mm (Variable lever Ratio Control) master cylinders. Galespeed designed & developed "Variable lever Ratio Control" gives you...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Black
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized BLACK. Replace your plastic OEM fuel cap...
FTEcu Universal Shift Rod Kit
$ 39.99
Universal Shift Rod Kit for Custom Applications Is your bike compatible with one of our Quickshift or Auto-Blip kits, but...
FTEcu ZX6R Quick Shifter Kit
$ 240.00
ECU-Based Quickshifter Kit for the 2019-2023 Kawasaki ZX-6R. With this kit and your flashed ECU you can up-shift without letting...
FTEcu Ninja 400 / Z400 / Ninja 650 KDS to OBDII Diagnotic Harness Adapter
$ 39.95
This harness allows you to use a standard OBD-II automotive scanner with your bike. Many later model bikes can...
FTEcu Kawasaki ZX-10R ABS Delete Plug
$ 349.00
FTECU’s Kawasaki ZX-10R ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your...
Flash Tune Kawasaki Teryx KRX 1000 Bench Tuning Kit
$ 450.00
Flash Tune / FTEcu Bench Tuning Kit for the Kawasaki Teryx KRX 1000. This Interface allows you to easily...
Graves Motorsports Replacement Frame Slider Puck - Long
$ 39.95
Graves Motorsports Replacement Frame Slider Puck "LONG." All Graves frame saver replacement pucks are available in Black or White. This listing...
Graves Motorsports Motorcycle Footpegs
$ 41.99
Graves Motorsports Replacement Footpeg. This is a direct replacement pegs for the Graves Motorsports rearsets. The bike pegs are...
Universal License Plate Light Kit
$ 29.95
License Plate Light Universal Kit. This universal LED kit comes with 1 high intensity LED light cluster, a plate mounting...
Aprilia RS660 Fender Eliminator Kit
$ 136.95
Graves Motorsports Aprilia RS660 (2019-2023) Graves Motorsports Tag Bracket kit for the RS660 is designed to eliminate the bulky stock...
Yamaha WR250R + WR250X WORKS Exhaust System
$ 1,199.00
Graves Motorsports Yamaha WR250R + WR250X WORKS Exhaust System. This exhaust features Graves Motorsports proprietary ADSD exhaust technology. Constructed...
Kawasaki ZX-4RR Cat-Back Slip-on Carbon Exhaust
$ 649.00
Graves Motorsports Kawasaki ZX4-RR Carbon Slip-On (Cat Back). Graves Motorsports hand-made in the USA Carbon slip-on Silencer for the ZX4RR....
Graves Motorsports Kawasaki ZX-6R Full LINK Titanium / Titanium WORKS Exhaust
$ 2,399.00
GRAVES WORKS LINK - Graves Motorsports Kawasaki ZX6R Full Titanium WORKS Exhaust System with Titanium Silencer. Graves' precise engineering develops precision products that are designed...
Graves Motorsports Kawasaki ZX-6R Header Upgrade
$ 1,769.00
$ 1,799.00
GRAVES WORKS LINK HEADER UPGRADE - Graves Motorsports Kawasaki ZX-6R Header Upgrade. Designed to upgrade your existing ZX6R cat-back slip-on to...
Graves Motorsports Exhaust Insert Base 49mm
$ 45.95
Graves Motorsports exhaust insert base 49mm. This sound limiting insert is designed to bolt into Graves exhaust systems silencers...
Graves Motorsports Yamaha XSR900 Dash Relocation Kit
$ 84.95
Graves Motorsports Yamaha XSR900 Dash Relocation Kit. This new bracket ergonomically places your XSR900 dash for best viewing (see...
DNA Yamaha R7 / FZ07 / MT07 / XSR700 / Tenere 700 Air Box Cover TC-Y7N14-S2
$ 89.00
DNA Yamaha R7 / FZ07 / MT07 / XSR700 / Tenere 700 Models. Air Box Cover. The DNA Stage 2 air...
DNA Yamaha R7 / FZ07 / MT07 / XSR700 / Tenere 700 Air Filter
$ 84.00
DNA Yamaha R7 / FZ07 / MT07 / XSR700 / Tenere 700 Models. FITMENT: R7 2021 + MT07 2014 +...
DNA KTM 690 / Husqvarna 701 Air Filter R-KT6SM16-0R
$ 85.00
DNA Air filter for the KTM 690 Enduro / Husqvarna 701 lines R-KT6SM16-0R FITMENT: Husqvarna Enduro 701 (16-22) / KTM 690...
DNA Yamaha R3 Air Filter 2015+ DNA-P-Y3S15-01
$ 73.00
DNA Yamaha R3 Air Filter for the 2014-2022 Models. FITMENT: Yamaha R3 2015+ FEATURES: OEM Air Filter Air Flow: 73.46...
DNA Kawasaki ZX6R Air Filter 2009 to 2024 ZX636 ZX-6R DNA-P-K6S09-0R
$ 89.00
DNA Kawasaki ZX-6R Air Filter for the 2009-2024 Models. FITMENT: ZX-6R 2009-2012 ZX-6R 2013-2024 ZX-6R KRT 2020-2024 FEATURES: OEM Air...