EDR Performance ZX-10R/RR Racing Camshaft 2019 - 2027 Race Kit valve springs
EDR Performance ZX10R DROP IN RACING CAMSHAFTS!
FITMENT: Kawasaki ZX-10R, ZX-10RR 2019-2027
Kawasaki ZX-10R/10RR Racing Camshaft Set for 2019-2027 models.
These cams were developed by EDR Performance as a result of our near 30 years experience building some of the fastest, most reliable racing engines around. These are the same camshafts we run in our ZX-10R builds for the last several years. We have used them in street bikes making over 190rwhp to full superbike/track day builds to over 210rwhp monsters!
These camshafts will result in a great improvement over the original stock camshafts. Our cam profiles are designed to produce maximum power over the complete RPM range, with very strong top end gains!. Typically we see up to 7 rwhp on just the camshafts only!
EDR PERFORMANCE CAMSHAFTS ARE 100% DROP IN! You can simply swap out camshafts and after you set valve clearances you can rip!
*EDR Racing Valve spring kit HIGHLY required for racing use!!
Price is $695/set in the option below*
These EDR Performance ZX-10R/RR camshafts are not regrinds and no core is needed.
Includes intake and exhaust camshafts. These cams will provide strong horsepower gains from as low as 7,000rpm all the way to redline with gains over +7hp using your OEM camshaft timing gears and stock cam timing.
However we highly recommend you fully time the cams to our EDR Racing specs (includes with camshafts upon request) and then you will see even more gains, especially on built engines. If you wish to fine tune them and get them degree'd (Timed) EDR can provide cam timing recommendation's. You will see impressive gains if you pair our camshafts with our velocity stacks and EDR ECU tuning.
EDR Performance racing camshaft sets are 100% drop in, no need to change valve springs (except for racing use where we 100% highly recommended!) but for street use, there is no need to remove cylinder head or even change cam timing. Simply install per oem manual directions, be sure to check/adjust valve clearances (if needed) according to the oem manual. Of course we ALWAYS recommend you set the camshafts to our timing specs if you have ability to degree camshafts.
These camshafts will add roughly +10 degrees more duration on the intake and +19 degrees more duration on the exhaust with both camshafts gaining around +0.5mm of lift.
Once order is placed, camshafts are 100% NON CANCELABLE OR REFUNDABLE
EDR Typically stocks these camshafts, however if out of stock will be custom made for you and can take up to 10 business days to ship. As of 8/26 we can no longer offer micro finishing on the camshafts due to end caps being discontinued, we will resume once caps become available.
