EDR Performance Ninja 400 400R ZX400 race profile camshafts
EDR Performance DROP IN PERFORMANCE Ninja 400 CAMSHAFTS!
NEW COMPLETE CAMSHAFTS MUST PROVIDE CORES OR Additional $500 will be added.
Kawasaki Ninja 400 Camshaft Set for 2018-2024 models.
These cams were developed by EDR Performance as a result of our near 30 years & all our 400 Ninja engine building experience. EDR Performance 400 ninja engines have won numerous races & championships. These are the same camshafts we run in our 400 ninja builds. From Street bikes wanting to make over 50 rwhp to full blown "Mini Superbike" 426cc 60+ hp mini monsters
These camshafts will result in a great improvement over the original stock camshafts. Our cam profiles are designed to produce maximum power over the complete RPM range.
These EDR Performance 400 Ninja camshafts are drop in as you can run oem springs, you must degree/set cam timing and valve clearances as well as checking PTV.
YOU MUST SEND IN YOUR CAMSHAFTS AND LEAD TIME IS TYPICALLY 3-5 weeks
If you wish to purchase new oem camshafts from us to provide and no core/your cams sent in please contact us. We offer this for an additional $450/pair
Includes intake and exhaust camshafts. These cams will provide strong horsepower gains from as low as 5,000rpm all the way to 12,000+rpm with gains of 10% normal and even more if you choose to degree and adjust the timing (EDR Performance can provide purchasers timing suggestions but timing is not 100% required) You will see massive gains if you pair our camshafts with our velocity stacks and EDR ECU tuning.
These camshafts are 100% drop in, no need to change valve springs, remove cylinder head While you dont have to set cam timing, we always highly recommend setting them to our cam timing. Simply install per oem manual directions, be sure to check/adjust valve clearances (if needed) according to the oem manual.
EDR Performance can provide clearance and/or timing recommendations by our engine builder, Eric Dorn if you choose to fine tune.
Once order is placed, camshafts are 100% NON CANCELABLE OR REFUNDABLE
These products are intended for closed course off road competition use only. Use of this product for any other purpose is strictly prohibited. Buyer assumes all responsibility to local laws, regulations and use. Racing parts are never legal for sale or use in California or any pollution controlled vehicle.
FITMENT: Ninja 400 2018-2024
Related Products
EDR Performance Clutch Kit: Kawasaki Ninja 400, Ninja 500, ex500 ex400,Z500, Z400 Clutch Upgrade Kit
$ 260.00
$ 349.00
EDR Performance Ninja 400/500 and Z400/500* UPGRADED CLUTCH KIT! Over 200+ kits sold worldwide! The 400 & 500 Ninja's are...
EDR Performance Tuned Unlocked ECU Re-Flash Kawasaki Flash reflashed tune
$ 395.00
EDR PERFORMANCE ECU is the leader in custom tuned & de-restricted ECU tuning for your Kawasaki Motorcycles. ****Click red...
EDR Kawasaki Ninja 400 (EX400) Velocity Stacks 2018+
$ 95.00
$ 279.00
The EDR Performance Ninja 400 Velocity stack kit Our Velocity are game-changers. Dyno-proven gains don't lie! Nearly 10% at the...
Galespeed Fluid Reservoir tank .32ml
$ 35.99
.32ml brake fluid tank with mounting bracket that rotates 360 degrees around the tank. Since it can be moved to any position, it...
Spark, Kawasaki, Ninja, 400, Stainless, Steel, "Konix", Full, Exhaust, System
$ 994.99
Spark Exhaust Technology Kawasaki Ninja 400 Stainless Steel "Konix" Full Exhaust System. Titanium silencer with stainless mid-pipe and racing header....
EDR Performance Ninja 400 400R ZX400 race profile camshafts
$ 1,495.00
EDR Performance DROP IN PERFORMANCE Ninja 400 CAMSHAFTS! NEW COMPLETE CAMSHAFTS MUST PROVIDE CORES OR Additional $500 will be added. ...
Galespeed Master Brake Switch Kit
$ 25.00
Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the...
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount
$ 45.95
Kawasaki ZX-4RR + Ninja 400 - AIM Solo 2 Mount Bracket is used to position the AIM Solo2 l(sold separately)...
Graves Exhaust Logo - Black and White
$ 6.50
Exhaust logo replacement badge. Foil based Graves "G" exhaust logo in Black and White. = 3.734 x 4.921 inches. Unless ordered with...
Graves Motorsports Bar End Mirror Adapter - Black
$ 24.95
Graves Motorsports Yamaha R1 + R6 Billet Aluminum Barend Mirror Adapter. Sold each (1) these motorcycle bar end mirror...
Galespeed Elaborate Brake Master Cylinder 19mm
$ 546.00
G Galespeed VRE Elaborate 19mm (Variable Ratio Elaborate) Brake master cylinder. Galespeed designed & developed "Variable lever...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Black
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized BLACK. Replace your plastic OEM fuel cap...
Kawasaki Teryx KRX 1000 Billet Machined Gap Cap - Green
$ 69.99
Graves Motorsports Kawasaki Teryx KRX 1000 Billet Machined Gap Cap in anodized GREEN finish. Replace your plastic OEM fuel...
FTEcu Ninja 400 / Z400 / Ninja 650 KDS to OBDII Diagnotic Harness Adapter
$ 39.95
This harness allows you to use a standard OBD-II automotive scanner with your bike. Many later model bikes can...
FTEcu Kawasaki ZX-10R ABS Delete Plug
$ 349.00
FTECU’s Kawasaki ZX-10R ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your...
Graves Motorsports Replacement Frame Slider Puck - Long
$ 21.99
Graves Motorsports Replacement Frame Slider Puck "LONG." All Graves frame saver replacement pucks are available in Black or White. This listing...
Graves Motorsports Motorcycle Footpegs
$ 38.50
Graves Motorsports Replacement Footpeg. This is a direct replacement pegs for the Graves Motorsports rearsets. The bike pegs are...
Universal License Plate Light Kit
$ 29.95
License Plate Light Universal Kit. This universal LED kit comes with 1 high intensity LED light cluster, a plate mounting...
Yamaha WR250R + WR250X WORKS Exhaust System
$ 1,149.49
Graves Motorsports Yamaha WR250R + WR250X WORKS Exhaust System. This exhaust features Graves Motorsports proprietary ADSD exhaust technology. Constructed...
DNA KTM 690 / Husqvarna 701 Air Filter R-KT6SM16-0R
$ 85.00
DNA Air filter for the KTM 690 Enduro / Husqvarna 701 lines R-KT6SM16-0R FITMENT: Husqvarna Enduro 701 (16-22) / KTM 690...
Yamaha R6 YXZ1000r High Precision Self-Oiling Cam Chain Tensioner
$ 196.95
Graves Motorsports Yamaha R6 / YXZ1000r High Precision Self Oiling Cam Chain Tensioner for 2006-2023 + R6 and 2016-2023 YXZ1000r...
EDR Performance 400 Ninja CNC Ported cylinder head 2018-2024 Kawasaki
$ 1,195.00
EDR Performance CNC Ported cylinder head for the 2018-2024 Kawasaki Ninja 400 Now you can have the exact same EDR...
41mm Bonamici Clip-on Handle Bars Fits: Ninja 400, R3, CBR500
$ 225.00
This is a set of 41mm Bonamici Clip-ons. These are in very good usable condition. Fits most bikes with 41mm...
41mm Bonamici Clip-On Handle Bars Fits: Ninja 400, R3, CBR500
$ 199.00
This is a set of 41mm Bonamici Clip-ons. These are in very good usable condition. Fits most bikes with 41mm...
Graves Motorsports 2 in 1 Socket ZX-6R
$ 64.99
Graves Motorsports 2 in 1 Socket is a direct fitment for the steering castle nut and front axle nut...
Graves Motorsports Rear Axle Alignment Tool Kawasaki ZX6R ZX10R
$ 45.00
Graves Motorsports Rear Axle Alignment Tool for the ZX-6R and ZX-10R (years listed below). The Rear Axle Alignment Tool...
Graves WORKS R7 Rear Wheel Captive Spacers Kit
$ 61.02
Graves Motorsports R7 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves WORKS R7 Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports R7 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves WORKS R6 Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha team bikes. These...
Yamaha R7 / R6 / R1 / FZ10 / MT10 - Rear Stand Hook Kit
$ 109.95
Yamaha R7 -R6 - R1 - FZ10 - MT10 Rear Bike Stand "HOOK" kit. Graves Motorsports Stand Hook Kit is designed to...
Graves Motorsports R3 WORKS Captive Rear Wheel Spacer Kit
$ 61.00
Graves Motorsports R3 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R3 WORKS Captive Front Wheel Spacer Kit
$ 59.00
Graves Motorsports R3 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R1 WORKS Captive Rear Wheel Spacer Kit
$ 63.00
Graves Motorsports R1 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha team bikes....
Graves Motorsports R1 R6 WORKS Captive Front Wheel Spacer Kit
$ 60.00
Graves Motorsports R1 R6 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory...
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit
$ 68.00
Graves Motorsports R6 WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves Motorsports R6 WORKS Captive Front Wheel Spacer Kit
$ 60.00
Graves Motorsports R6 WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves Yamaha factory bikes....
Graves WORKS Kawasaki ZX-4RR Rear Wheel Captive Spacers Kit
$ 69.00
Graves Motorsports ZX-4RR WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves team bikes. These spacer...
Graves Motorsports WORKS Kawasaki ZX-6R Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports Kawasaki ZX-6R (2019-2024) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-6R Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports Kawasaki ZX-6R (2019-2024) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-10R Rear Wheel Captive Spacers Kit
$ 68.00
Graves Motorsports Kawasaki ZX-10R (2016-2023) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki ZX-10R Front Wheel Captive Spacers Kit
$ 60.00
Graves Motorsports Kawasaki ZX-10R (2016-2023) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race team...
Graves Motorsports WORKS Kawasaki Ninja 400 Rear Wheel Captive Spacers Kit
$ 63.00
Graves Motorsports Kawasaki Ninja 400 (2018-2023) WORKS Captive Rear Wheel Spacer Kit. Built using R&D from the WORKS Graves race...
Graves Motorsports WORKS Kawasaki Ninja 400 Front Wheel Captive Spacers Kit
$ 55.00
Graves Motorsports Kawasaki Ninja 400 (2018-2023) WORKS Captive Front Wheel Spacer Kit. Built using R&D from the WORKS Graves race...
Graves Motorsports Yamaha R1 Suspension Link 09-14
$ 500.00
Graves Motorsports R1 suspension linkages are the result of continued testing and race experience on the Yamaha R1. These...
Graves Motorsports Yamaha R1 Upper Shock Mount 09-14
$ 69.95
Graves Motorsports Yamaha R1 Upper Shock Mount 09-14. Use the Graves Motorsports clevis on your 2009-2013 Yamaha R1, when...
Graves Motorsports Yamaha R6 Suspension B Link
$ 700.00
Graves Motorsports Yamaha R6 Suspension Link B for the 2006 + model bikes (does not fit R6S). These kits...
Graves Motorsports Yamaha R6 Suspension A Link
$ 700.00
Graves Motorsports Yamaha R6 Suspension Link A for the 2006 + model bikes (does not fit R6S). These kits...
Graves Pneumatic Preload Adjuster for Ohlins TTX Shocks
$ 395.00
Graves Pneumatic Preload Adjuster for Ohlins TTX shocks: ZX-10R, ZX-6R, Ninja 400, R6, R1 and others (some models could require an...
Graves Pneumatic Preload Adjustment Tool
$ 299.00
Graves Pneumatic Preload Adjuster Tool is used for engaging / disengaging the Graves pneumatic preload adjuster shock collars. See view...
Graves Kawasaki ZX10R + ZX6R Shim Kit
$ 136.95
Graves Motorsports - Kawasaki ZX-6R + ZX-10R shim kits are crucial for riders using higher or lower profile tires on...