EDR Honda CBR600RR 2007+ VELOCITY STACKS
EDR Performance CBR600RR Velocity Stack kit
EDR Performance CBR600RR Velocity stacks are here and they are dominating! By far one of our biggest sellers due to the power v dollar gains! These stacks will gain you up to 14 rwhp!! That is more hp than any full exhaust will give you and at a fraction of the cost! Plus you can install at home in under 30 mins time!
The Honda CBR600RR is one of the all time great 600's and still one of our favorite bikes.
However, since designed in 2006 for the 2007 year, it has evolved very little and many CBR600RR owners have felt let down in the overall power and top end of the bike. Honda is notorious for "choking" their bikes' intake systems down, especially in the USA for noise and emissions. Well no more....
Thanks to EDR Performance, our latest velocity stack kit improves power throughout the entire RPM range, especially in upper midrange and top end, right where these CBR600RR's need it!
We kept the same power and torque curve as close as possible to the stock set up to ensure you have a smooth power band, however as you can see with our stacks the power does not drop off at the top end! It continues well past 15,000 rpm. The stock bike runs out of breath as low as 12,000 on some years!
The Honda CBR600RR is one of the all time great 600's and still one of our favorite bikes.
However, since designed in 2006 for the 2007 year, it has evolved very little and many CBR600RR owners have felt let down in the overall power and top end of the bike. Honda is notorious for "choking" their bikes' intake systems down, especially in the USA for noise and emissions. Well no more....
Thanks to EDR Performance, our latest velocity stack kit improves power throughout the entire RPM range, especially in upper midrange and top end, right where these CBR600RR's need it!
We kept the same power and torque curve as close as possible to the stock set up to ensure you have a smooth power band, however as you can see with our stacks the power does not drop off at the top end! It continues well past 15,000 rpm. The stock bike runs out of breath as low as 12,000 on some years!
This gives you, the rider, the confidence to get on the throttle sooner with a more predictable throttle response as well as a lot more top end power and speed! Our EDR CBR600RR Velocity stack kit will allow you to have a much stronger midrange and off corner drive and for once, also have a strong top end that doesn't fall off (stop making power) at 12,000.. many CBR600RR owners know what we are talking about
These velocity stacks have been simulated with our Solid Works software, then extensively tested on our in house dyno with both the stock ecu and our flashed unrestricted ecu program. We had over 7 designs tested until finally finding the perfect blend of smooth stock like low end and throttle response now with strong top end that allows the bike to pull all the way to 15,000 rpm rev limit!
Installing from start to finish takes less than 30 mins time! Unlike the others "carbon" stacks, ours are impervious to all chemicals (race fuel) while theirs are NOT!. Also our stacks maintain their structure in excess of 145*c temperatures, while others will fail. Don't fall for the "carbon" ones as you cant see them and the resin does not hold up well with race fuel or high temps! Professional installation is always recommended however there are no special tools needed.
The EDR Performance CBR600RR Velocity stacks are 100% designed, developed, tested and produced IN HOUSE at our race shop and dyno tested in our complete Dynojet 250i dyno inside an INC temp controlled dyno facility. 100% from start to finish done at EDR Performance
*stacks are not available in colors, only black due to the Onyx + Carbon filament *
Kit Includes:
1x Right Velocity Stack
1x Left Velocity Stack
1x Thread Lock packet
These velocity stacks have been simulated with our Solid Works software, then extensively tested on our in house dyno with both the stock ecu and our flashed unrestricted ecu program. We had over 7 designs tested until finally finding the perfect blend of smooth stock like low end and throttle response now with strong top end that allows the bike to pull all the way to 15,000 rpm rev limit!
Installing from start to finish takes less than 30 mins time! Unlike the others "carbon" stacks, ours are impervious to all chemicals (race fuel) while theirs are NOT!. Also our stacks maintain their structure in excess of 145*c temperatures, while others will fail. Don't fall for the "carbon" ones as you cant see them and the resin does not hold up well with race fuel or high temps! Professional installation is always recommended however there are no special tools needed.
The EDR Performance CBR600RR Velocity stacks are 100% designed, developed, tested and produced IN HOUSE at our race shop and dyno tested in our complete Dynojet 250i dyno inside an INC temp controlled dyno facility. 100% from start to finish done at EDR Performance
*stacks are not available in colors, only black due to the Onyx + Carbon filament *
Kit Includes:
1x Right Velocity Stack
1x Left Velocity Stack
1x Thread Lock packet
These products are intended for closed course off road competition use only. Use of this product for any other purpose is strictly prohibited. Buyer assumes all responsibility to local laws, regulations and use. Racing parts are never legal for sale or use in California or any pollution controlled vehicle.
Related Products
RACETORX LADYBIRD RESERVOIR BRACKETS
$ 19.00
Race bikes often create difficulties when mounting brake reservoirs. The stock location will often rub on bodywork, or sometimes the...
ECU Re-Flash Honda
$ 325.00
EDR PERFORMANCE ECU Flashing service including return shipping! PLEASE FILL OUT AND ATTACH THIS DOCUMENT WITH YOUR ECU! Honda models. ...
EDR Honda CBR600RR 2007+ VELOCITY STACKS
$ 425.00
$ 495.00
EDR Performance CBR600RR Velocity Stack kit EDR Performance CBR600RR Velocity stacks are here and they are dominating! By far one...
EDR HONDA CBR1000RR 2017-2024 + SP1 & SP2 VELOCITY STACKS
$ 425.00
$ 499.00
EDR Performance 2017-2024 CBR1000RR + SP1 + SP2 Velocity stacks! Get OVER 8 RWHP with our stacks for USA spec...
EDR Performance Oil Funnel Screw in vented bike specific oil change
$ 18.99
EDR Performance screw in oil funnel! **In production now 3/17 Pre-Orders will be shipped in order of time placed and...
EDR HONDA GEN6 VFR800 2002-2013 VELOCITY STACKS
$ 250.00
The EDR Performance Honda VFR800 Gen 6 (2002-2013) Velocity stack kit is here! We have many VFR800 customers and the #1 performance...
Galespeed Fluid Reservoir tank .32ml
$ 35.99
.32ml brake fluid tank with mounting bracket that rotates 360 degrees around the tank. Since it can be moved to any position, it...
Racetorx Kawasaki ZH2 / H2 Gear shift support
$ 104.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
EDR Performance Hooded Windbreaker Zip Up Jacket in Black & White
$ 75.00
In stock! Lightweight Race hooded windbreaker. Water resistant, breathable, & perfect for Spring and Fall weather. Looks great over our...
EDR Performance Honda Smog Block Off Plates
$ 40.00
The new EDR Performance Honda smog block off plates are now available! They are bolt on, look great, weigh 1/3...
RACETORX YAMAHA MT07 / T7 TENERE / R7 / TRACER700 GEAR SHIFT SUPPORT
$ 104.00
We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our gear...
Racetorx Yamaha MT10 / FZ10 / R1 / R1M Gear Shift Support
$ 74.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
RACETORX MOTORCYCLE FRONT AND REAR GP-STYLE BRAKE RESERVOIR KIT
$ 29.00
Racetorx Brake Reservoir Res Delete Kits This kit is ideal for replacing the clumsy bulky looking street setup of the...
EDR HONDA CBR1000RR + SP 2008-2016 VELOCITY STACKS
$ 425.00
The EDR Performance 2008-2016 CBR1000RR Velocity Stack kits! One of the best gains you can do to your 2008-2016 CBR1000RR!...
DNA Honda CBR1000RR (04-07) Air Filter
$ 99.99
DNA Honda CBR 1000 RR air filter adds horsepower while letting your sportbike breathe better. The efficiency of DNA Filters maximizes...
Galespeed Master Brake Switch Kit
$ 25.00
Galespeed Master Brake Switch Kit. This switch sensor wires into your bikes factory harness to allow activation of the...
Galespeed Elaborate Brake Master Cylinder 19mm
$ 650.00
Galespeed VRE Elaborate 19mm (Variable Ratio Elaborate) mastercylinder /. Galespeed designed & developed "Variable lever Ratio Control" gives you...
FTEcu Kawasaki ZX-10R ABS Delete Plug
$ 349.00
FTECU’s Kawasaki ZX-10R ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your...
Graves Motorsports Replacement Frame Slider Puck - Long
$ 21.99
Graves Motorsports Replacement Frame Slider Puck "LONG." All Graves frame saver replacement pucks are available in Black or White. This listing...
DNA KTM 690 / Husqvarna 701 Air Filter
$ 85.90
DNA Air filter for the KTM 690 Enduro / Husqvarna 701 lines. FITMENT: Husqvarna Enduro 701 (16-22) / KTM 690 SMC...
Graves Motorsports Kawasaki ZX-6R Racing Camshaft Set
$ 1,695.00
$ 1,768.00
Graves Motorsports Kawasaki ZX-6R Racing Camshaft Set for 2013-2023 models. These cams were developed by Graves Racing programs to...
Racetorx Kawasaki ZX10 ZX10R 2011-present Gear shift support
$ 186.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Racetorx Ducati Panigale/streetfighter V4 Gear shift support
$ 193.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Racetorx Yamaha R1 14B 09-14 Gear Shift Support
$ 68.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Racetorx Triumph Speed Triple / Tiger 1050 Gear shift support 2005-2015 – 2016-2022
$ 188.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Racetorx Kawasaki ZX4RR Gear shift support
$ 74.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Racetorx Kawasaki ZX12R Gear shift support
$ 74.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
RACETORX BRAKE JUNCTION VALVES
$ 63.00
Racetorx Junction Valve. Having your thumb brake or finger brake installed in conjunction with your rear master cylinder has never...
Racetorx Honda VTR RC51 SP CBR Cb Gear shift support
$ 74.00
Description We at Racetorx are the largest manufacturer of gear shift supports to suit a vast number of motorcycles. Our...
Pirelli Diablo Supercorsa SP V4 200/55/17 Motorcycle Tire
$ 382.00
$ 466.00
DIABLO™ SUPERCORSA SP - V4 FROM TRACK TO ROAD The Pirelli treaded tire directly derived from racetrack competitions and engineered...
Pirelli Diablo Supercorsa SP V4 180/60/17 Motorcycle Tire
$ 293.00
$ 357.00
DIABLO™ SUPERCORSA SP - V4 FROM TRACK TO ROAD The Pirelli treaded tire directly derived from racetrack competitions and engineered...
Pirelli Diablo Supercorsa SP V4 120/70/17 Motorcycle Tire
$ 240.00
$ 292.00
DIABLO™ SUPERCORSA SP - V4 FROM TRACK TO ROAD The Pirelli treaded tire directly derived from racetrack competitions and engineered...
DID 520 ERV7 120-Link Chain Race Street GOLD Chain
$ 199.00
$ 266.00
The 520ERV7 is the top-of-the-line racing chain for all types of motorcycle racing, on and off road. Incredible design and...
2017-2021 CBR1000RR Yoshimura Fender Eliminator Tail Tidy Kit
$ 139.00
$ 164.00
This new kit incorporates our new Shrink Solder Connectors and our new and improved weather tight light housing, and brighter...
EDR Performance 83° Valve Stems
$ 29.99
$ 34.95
Valve is angled at 83° for easier access for inflating and checking tire pressure. Made in Italy. This price includes...
DNA HONDA CB1000R (2018+) Air Filter
$ 114.99
DNA Honda CB 1000R (2018+) air filter adds horsepower while letting your sportbike breathe better. The efficiency of DNA Filters...
EDR HONDA Gen8 VFR800 2014-2017 VELOCITY STACKS
$ 250.00
The EDR Performance VFR800 Velocity stack kit is finally here! For 20 years now VFR owners have begged for more power,...
Bonamici, Honda, CBR, 1000RR, Mirror, Block, Offs, (2017+), (Red)
$ 84.99
Bonamici Mirror Block-Off Plates are a must if you plan to remove your OEM sportbike mirrors. Increase aerodynamic advantage, lose weight,...
Rapidbike, Fuel, Tuning, Module, Honda, Racing
$ 595.00
All Rapid Bike products are for closed-course competition use only. This kit includes the Rapid Bike Racing module, a USB...
Rapidbike, Fuel, Tuning, Module, Honda, EVO
$ 525.00
All Rapid Bike products are for closed-course competition use only. This kit includes the Rapid Bike Evo module, USB cable...
EDR Performance Intake Plugs Universal BMW HONDA SUZUKI KAWASAKI YAMAHA KTM DUCATI
$ 40.00
EDR Performance intake port plugs. Great for transport and or storage! EDR Performance has engines shipped in every week for...
EDR Performance CBR1000RR CNC Ported Cylinder Head 2008-2024
$ 1,795.00
EDR Performance CNC Ported cylinder head for the Honda CBR1000RR SC59 + SC77 Now you can have the exact same...
EDR Indoor Motorcycle Storage
$ 125.00
EDR INDOOR MOTORCYCLE STORAGE EDR Performance is now offering monthly Indoor Secure heated Storage for your motorcycle. We solved the...
41mm Bonamici Clip-on Handle Bars Fits: Ninja 400, R3, CBR500
$ 225.00
This is a set of 41mm Bonamici Clip-ons. These are in very good usable condition. Fits most bikes with 41mm...
41mm Bonamici Clip-On Handle Bars Fits: Ninja 400, R3, CBR500
$ 199.00
This is a set of 41mm Bonamici Clip-ons. These are in very good usable condition. Fits most bikes with 41mm...
Yamaha R6 Rear Wheel Socket Tool
$ 51.99
Yamaha R6 Rear Wheel Socket Tool. This new Graves tool is designed to be used during the installation of and...
Graves Motorsports Kawasaki ZX-4RR + Ninja 400 + Yamaha R3 Axle Tool
$ 45.00
Graves Motorsports Rear Axle Alignment Tool for the 2023 ZX-4RR + 2018-2023 + Ninja 400 and 15-23 + Yamaha...
Graves Motorsports 3 in 1 Socket R1
$ 59.99
Graves Motorsports 3 in 1 Socket is a direct fitment for the steering castle nut on the 98-14 Yamaha...
Graves Motorsports 3 in 1 Socket R6
$ 59.99
Graves Motorsports 3 in 1 Socket is a direct fitment for the steering castle nut on the 99-19 Yamaha...
Graves Motorsports Rear Axle Alignment Tool R1 R6
$ 45.00
Graves Motorsports Rear Axle Alignment Tool for the 99-22 + Yamaha R6, 06-09 R6S and 98-22 + Yamaha R1...