EDR Honda CBR600RR 2007+ VELOCITY STACKS
Gains up to 8 rwhp!! Massive for a 600cc.
The Honda CBR600RR is one of the all time great 600's and still one of our favorite bikes.
However, since designed in 2006 for the 2007 year, it has evolved very little and many CBR600RR owners have felt let down in the overall power and top end of the bike. Honda is notorious for "choking" their bikes' intake systems down, especially in the USA. Well no more.
Thanks to EDR Performance, our latest velocity stack kit improves power throughout the entire RPM range, especially in upper midrange and top end, right where these CBR600RR's need it!
We kept the same power and torque curve as close as possible to the stock set up to ensure you have a smooth power band, however as you can see with our stacks the power does not drop off at the top end! It continues well past 15,000 rpm. This gives you, the rider, the confidence to get on the throttle sooner with a more predictable throttle response as well as a lot more top end power and speed! Our EDR CBR600RR Velocity stack kit will allow you to have a much stronger midrange and off corner drive and for once, also have a strong top end that doesn't fall off (stop making power) at 13,500.. many CBR600RR owners know what we are talking about
These velocity stacks have been simulated with our Solid Works software, then extensively tested on our in house dyno with both the stock ecu and our flashed unrestricted ecu program. We had over 7 designs tested until finally finding the perfect blend of smooth stock like low end and throttle response now with strong top end that allows the bike to pull all the way to 15,000 rpm rev limit!
Installing from start to finish takes less than 30 mins time! Unlike the others "carbon" stacks, ours are impervious to all chemicals (race fuel) while theirs are NOT!. Also our stacks maintain their structure up to 300* temperatures, while others will fail. Professional installation is always recommended however there are no special tools needed.
These EDR CBR600RR Velocity stacks are 100% designed, developed, tested and produced IN HOUSE at our race shop and dyno tested in our complete Dynojet 250i dyno inside an INC temp controlled dyno facility. 100% from start to finish done at EDR Performance
*stacks are not available in colors, only black due to the Onyx + Carbon filament *
Kit Includes:
1x Right Velocity Stack
1x Left Velocity Stack
1x Thread Lock packet
The Honda CBR600RR is one of the all time great 600's and still one of our favorite bikes.
However, since designed in 2006 for the 2007 year, it has evolved very little and many CBR600RR owners have felt let down in the overall power and top end of the bike. Honda is notorious for "choking" their bikes' intake systems down, especially in the USA. Well no more.
Thanks to EDR Performance, our latest velocity stack kit improves power throughout the entire RPM range, especially in upper midrange and top end, right where these CBR600RR's need it!
We kept the same power and torque curve as close as possible to the stock set up to ensure you have a smooth power band, however as you can see with our stacks the power does not drop off at the top end! It continues well past 15,000 rpm. This gives you, the rider, the confidence to get on the throttle sooner with a more predictable throttle response as well as a lot more top end power and speed! Our EDR CBR600RR Velocity stack kit will allow you to have a much stronger midrange and off corner drive and for once, also have a strong top end that doesn't fall off (stop making power) at 13,500.. many CBR600RR owners know what we are talking about
These velocity stacks have been simulated with our Solid Works software, then extensively tested on our in house dyno with both the stock ecu and our flashed unrestricted ecu program. We had over 7 designs tested until finally finding the perfect blend of smooth stock like low end and throttle response now with strong top end that allows the bike to pull all the way to 15,000 rpm rev limit!
Installing from start to finish takes less than 30 mins time! Unlike the others "carbon" stacks, ours are impervious to all chemicals (race fuel) while theirs are NOT!. Also our stacks maintain their structure up to 300* temperatures, while others will fail. Professional installation is always recommended however there are no special tools needed.
These EDR CBR600RR Velocity stacks are 100% designed, developed, tested and produced IN HOUSE at our race shop and dyno tested in our complete Dynojet 250i dyno inside an INC temp controlled dyno facility. 100% from start to finish done at EDR Performance
*stacks are not available in colors, only black due to the Onyx + Carbon filament *
Kit Includes:
1x Right Velocity Stack
1x Left Velocity Stack
1x Thread Lock packet
